Application: to protect inverter with two MPP trackers or two inverter with each one MPP tracker. The technical connection conditions of the inverter manufacturer are to be observed! If several module strings are connected in parallel, the instructions of the module manufacturer regarding reverse current resistance must be observed. Generator connection box for maximum 2x five terminal points for two MPP tracker.
- With remote signalling contact (FM)
- Generator Connection Box with two SPD
- Housing of surface mounting (300 x 200 x 132 mm) is UV resistant
- 2x 5 terminal points (e. g. 2x 2 input terminal and 2x 2 output terminal)
- Two surge arrester inside
- Terminals can be used as points of measurement
- With remote signalling contact (FM)
- EAC certification
- Degree of protection (IEC EN 60529): IP66
| IEC category | |
| Max. system voltageUocSTC | 800 V= |
| Max. current per input terminal (+) | 57 A DC |
| Max. current per output terminal | 57 A DC |
| Operating temperature rangeTU | -40 - +80 °C |
| Cross section for E-termials (entry) | 16 mm² |
| Cross section for A-terminals (exit) | single wire / stranded 16 mm² |
| Cable feedthrough | 9x M16 |
| Degree of protection (IEC EN 60529) | IP 66 |
| Dimensions (L x W x H) | 300 x 200 x 132 mm |
Accessories
air-rating plug M12
Article Nr.: 170140
air-rating plug M12
Article Nr.: 170140
| Dimensions (Ø × L) | 19 x 17 mm |
| Degree of protection (IEC EN 60529) | IP 68 |
| Housing material | PA6-V2 |
| Locking torque | 0,5-1,0 Nm |
| Operating temperature rangeTU | -40 - +105 °C |
