PP BCD TN 25/50-LED-M/FM
Article Nr. : 381209
Combined two-pole arrester for 1-phase TN systems.
- Combined Arresters Class I+II+III (T1+T2+T3)
- Test standard: IEC 61643-11 / EN 61643-11
- Surge arrester based on varistors (MOV) and GDT
- Execution with a 40 kA MOV
- Very low voltage protection level
- EAC certification
- Not leackage current free
| IEC category | Type 1 + 2 + 3 / class I+II+III |
| Nominal voltage ACUN | 230 / 400 V~ |
| Max. continuous operating voltage AC (50/60 Hz) Uc | 350 V~ |
| Insulation resistanceRisol | >10 GΩ |
| Protection level at 100% lightn. imp. sparkover voltage (1.2/50µs)Up | ≤ 1,0 kV |
| Protection levelUp | ≤ 1,0 kV |
| Residual voltage at 5kA (8/20 μs)Ures | 600 V |
| Lightning impulse current (10/350 µs)Iimp | 25 kA |
| Nominal discharge current (8/20 µs)In | 40 kA |
| Response timetA | <50 ns |
Additional Information
| Follow-on current extinguishing capability at Uc (50/60 Hz)Ifi | 4,0 kA |
| Short-circuit withstand capability at max. back-up fuseISCCR | 25 kAeff |
| Max. acceptable back-up fuse F2 (spur wiring) | 250 A gG |
| Max. acceptable back-up fuse F1 (serial wiring) | 125 A gG |
| Operating temperature rangeTU | -40 - +80 °C |
| Max. conductor cross section | 50 mm² stranded/35 mm² flexible |
| Recommended conductor cross section | 25 (IEC min. 16 mm²) mm² |
| Max. connection torque for terminals | 4,0 Nm |
| Enclosure material / colour | polycarbonate (halogen-free) UL 94-V0 / yellow |
| Degree of protection (IEC EN 60529) | IP 20 |
| Mounting on | 35 mm DIN rail (EN 60715) |
| Switching capacity FM | 250 V/2 A |
| Max. conductor cross section FM | 1,5 mm² |
| Max. locking torque FM terminals | 0,25 Nm |
| Power supply system | 1 phase TN systems |
| Dimension (DIN 43880) | 4 TE |