284848-A_2017.jpg
EMC filter for data and signal lines combined with surge protection enables smooth operation of sensitive electronic equipment in rough environment.
  • Signal and data line protection with low-pass filter
  • Signal and data line protection with low-pass filter
  • Protective circuit for 3 signal lines with common ground
  • Applicable at the boundaries LPZ 0A - 2 and higher
  • Mounting on 35 mm DIN rail (EN 60715)
  • Degree of protection according to IEC EN 60529: IP 20
  • Space required for installation: 18 mm
  • EAC certification
IEC category D1 / C2 / C1 / C3
Nominal voltage DCUN 48 V=
Max. continuous operating voltage DCUc 53 V=
Max. continuous operating voltage AC (50/60 Hz) Uc 37 V~
Nominal currentIL 0,4 A
D1 lightning impulse current (10/350 µs) per lineIimp 2,5 kA
D1 lightning impulse current (10/350 µs) totalItotal 7,5 kA
C2 nominal discharge current (8/20 µs) per lineIn 10 kA
C2 nominal discharge current (8/20 µs) totalImax 20 kA
Protection level at In (line-earth)Up ≤ 72 V
Additional Information
Leakage current at Umax DC ≤ 5 µA
DC resistanceR 3,2 Ω
Series inductance, typ.L 30 µH
Capacitance, line-earthC ≤ 0,8 nF
Max. operating frequency (-3 dB)fG 600 kHz
Operating temperature rangeTU -25 - +85 °C
Max. conductor cross section 2.5mm² solid or 1.5mm² flexible with sleeve
Max. connection torque for terminals 1,5 Nm
Enclosure material / colour polycarbonate (halogen-free) UL 94-V0 / yellow
Degree of protection (IEC EN 60529) IP 20
Mounting on 35 mm DIN rail (DIN EN 60715 )
Dimension (DIN 43880) 1 TE

Accessories

Related Products