EP-T3/230 KM-20kA
Article Nr. : 362042
Surge arrester for installation systems and terminal equipment with optical fault indication (LED).
- Surge voltage protector (class III T3 )
- Applicable at the LPZ transition point 2-3
- Test standard: IEC 61643-11 / EN 61643-11
- Protection against longitudinal and transverse voltages for loads up to 16 A
- Universal device for use in cable ducts and holder boxes
- Applicable für protection of LED illuminant.
- EAC certification
| IEC category | Type 2 + 3 / class II + III |
| Nominal voltage ACUN | 230 V~ |
| Max. continuous operating voltage AC (50/60 Hz) Uc | 255 V~ |
| Max. acceptable fuse or back-up fuse | 16 A gG |
| Rated load currentIL | 16 A |
| Protection levelUp | ≤ 1,3 kV |
| Combined surgeUoc | 10 kV |
| Nominal discharge current (8/20 µs)In | 10 kA |
| Max. impulse discharge current (8/20 µs)Imax | 20 kA |
| Operating temperature rangeTU | -15 - +60 °C |
Additional Information
| Degree of protection (IEC EN 60529) | IP 21 |
| Conductor length | 90 mm |
| Dimensions (L x W x H) | 55 x 33 x 12 mm |
| Mounting on | under-floor systems, cable trys and device installation boxes |
