Fully pluggable surge protective arrester type 2 (class II) for the use between L - N wires. Complete module with 1+0 circuit.
- Remote changeover contact (FM)
- Class II (T2) Surge Arresters, pluggable
- Test standard: IEC 61643-11 / EN 61643-11
- Vibration test standard: DIN EN 60068-2-6, IEC 60068-2-6
- Shock test standard: DIN EN 60068-2-27, IEC 60068-2-27
- Mounting on 35 mm DIN rail (EN 60715)
- EAC certification
| IEC category | Type 2 /class II |
| Nominal voltage ACUN | 400 V~ |
| Max. continuous operating voltage AC (50/60 Hz) Uc | 550 V~ |
| Nominal discharge current (8/20 µs)In | 20 kA |
| Max. impulse discharge current (8/20 µs)Imax | 40 kA |
| Protection level at In (8/20 µs)Up | ≤ 2,5 kV |
| Protection level at 5 kAUp | ≤ 1,8 kV |
| Short-circuit withstand capability at max. back-up fuseISCCR | 25 kAeff |
| Max. acceptable fuse or back-up fuse | 125 A gG |
| Operating temperature rangeTU | -40 - +80 °C |
Additional Information
| Min. conductor cross section at terminals | 1.5 mm² solid/flexible |
| Max. conductor cross section | 35 mm² stranded/25 mm² flexible |
| Enclosure material / colour | Thermoplastic, yellow, UL 97 V-0 |
| Degree of protection (IEC EN 60529) | IP 20 |
| Dimension (DIN 43880) | 1 TE |
| Max. operating voltage remote contact FM | 250 V AC/125 V DC |
| Max. operating current remote contact FM | 1 A AC/200 mA DC |
| Max. connection torque for terminals | 3,5 Nm |
| Max. locking torque FM terminals | 0,25 Nm |
| Composed of: number of moduls | 1x 38 80 05 |
| Power supply system | between L and N |
Accessories
EL-T2-75-M
Article Nr.: 388000
EL-T2-75-M
Article Nr.: 388000
| IEC category | Type 2 /class II |
EL-T2-130-M
Article Nr.: 388001
EL-T2-130-M
Article Nr.: 388001
| IEC category | Type 2 /class II |
EL-T2-275-M
Article Nr.: 388002
EL-T2-275-M
Article Nr.: 388002
| IEC category | Type 2 /class II |
EL-T2-440-M
Article Nr.: 388004
EL-T2-440-M
Article Nr.: 388004
| IEC category | Type 2 /class II |
EL-T2-550-M
Article Nr.: 388005
EL-T2-550-M
Article Nr.: 388005
| IEC category | Type 2 /class II |
DAK 2x16
Article Nr.: 170110
DAK 2x16
Article Nr.: 170110
| Type of connection | |
| Max. conductor cross section | 2x 16 mm² |
| Dimensions (L x W x H) | 17 x 38,5 x 21 mm |
