DP RJ45-CAT6-48V-Tr
Article Nr. : 240005
All 8 signal lines (4 pair of wires) are protected simultaneously. Compact surge protective module for the protection of data networks, and network devices such as hubs, switches, server. The adaptor plug style provides an easy application in cable ducts or directly at the terminal equipment. The protection device fulfills the IEEE standards PoE (802.3af-2003), PoE Plus (802.3at-2009) and 4-pair PoE (802.3bt-2018).
- Cat6 Application
- Suitable for Cat. 6 / class E applications (up to Gbit Ethernet)
- Test standard: IEC 61643-21 / EN 61643-21
- All 8 signal lines (4 pair of wires) are protected simultaneously.
- Applicable at the boundaries LPZ 0A - 2 and higher
- RJ45 SPD for PoE (Power over Ethernet)
- Mounting on 35 mm DIN rail (EN 60715)
- EAC certification
| IEC category | D1 / C2 / C1 / C3 |
| Nominal voltage DCUN | 48 V= |
| Max. continuous operating voltage DCUc | 48 V= |
| Nominal currentIL | 1 A |
| D1 lightning impulse current (10/350 µs)Iimp | 1 kA |
| C2 nominal discharge current (8/20 µs) line-lineIn | 0,15 kA |
| C2 nominal discharge current (8/20 µs) totalImax | 10 kA |
| Protection level at In (line-line)Up | 150 V |
| Protection level at In (line-earth)Up | 550 V |
| Max. frequencyfG | 250 MHz |
Additional Information
| Capacitance wire-wireC | ≤ 30 pF |
| Capacitance, line-earthC | ≤ 25 pF |
| Response timetA | 1 ns |
| Terminal input/output | RJ 45, shielded |
| Degree of protection (IEC EN 60529) | IP 20 |
| Housing material | zinc diecasting |
| Dimensions (L x W x H) | 19 x 75 x 46 mm |
| Cat. 6 |