EnerPro 36V-6A/LED
Article Nr. : 243602
Surge voltage arrester for electrical and electronical devices in looped-in wiring, with disconnection device without interruption of the power supply. A very low protection level allows the use as SPD type 3 (class III).
- SPD type 2 for DC power supplies
- Two-pole SPD for operating current up to 6 A
- EAC certification
| IEC category | Type 2 /class II |
| Nominal voltage DCUN | 36 V= |
| Rated voltage DC (1-2/1p-2p) UN | 36 V= |
| Rated voltage AC (1-2 / 1p-2p)UN | 24 V~ |
| Max. operating voltage DC (1-2 / 1p-2p)Uc | 40 V= |
| Max. operating voltage AC (1-2 /1p-2p)Uc | 29 V~ |
| Max. operating currentIL | 6 A |
| Response timetA | < 25 ns |
| Series inductance, typ.L | 20 µH |
| Protection level (line-earth)Up | 650 V |
Additional Information
| Protection level line-line at 1 kV/µsUp | ≤ 200 V |
| Short-circuit current extinguishing capacity line-line | ≤ 6 A |
| Short-circuit current extinguishing capacity line-earth | ≤ 1 A |
| Max. impulse discharge current (8/20 µs)Imax | 40 kA |
| Critical discharge current (10/700 µs) | 1000 A |
| Max. alternating discharge current (50 Hz/ 5x 0,5s)Iwn | 50 A |
| Service life test current (500 x 10/700 µs)il | 200 A |
| Max. current 50 Hz/0.5 sIg | 80 A |
| Operating temperature rangeTU | -40 - +80 °C |
| Max. conductor cross section | 50 mm² stranded/35 mm² flexible |
| Max. connection torque for terminals | 4,0 Nm |
| Dimensions (L x W x H) | 52,5 x 90 x 64 mm |
| Enclosure material / colour | polycarbonate (halogen-free) UL 94-V0 / yellow |
| Degree of protection (IEC EN 60529) | IP 20 |
