Lightning current discharge arrester (class I) with rare-gas-filled spark gap for the use between L - N wire. They provide extremely high discharge capacity with at the same time very low protection levels and they also do not need any damageable internal or external electronic trigger.
- Lightning current arresters type 1 (class I)
- Applicable at the boundaries LPZ 0A - 1
- Test standard: IEC 61643-11 / EN 61643-11
- Vibration test standard: DIN EN 60068-2-6, IEC 60068-2-6
- Shock test standard: DIN EN 60068-2-27, IEC 60068-2-27
- Mounting on 35 mm DIN rail (EN 60715)
- Enclosure material: thermoplastic with the colours yellow and black
- No leakage currents, thus, allowing installation upstream of power meters
- Optical status indication (red pin appears)
- Single modules can be replaced easily
- Remote changeover contact (FM)
- EAC certification
| IEC category | Type 1 / class I |
| Nominal voltage ACUN | 230/400 V~ |
| Max. continuous operating voltage AC (50/60 Hz) Uc | 350 V~ |
| Lightning impulse current (10/350 µs) totalItotal | 25 kA |
| Lightning impulse current (10/350 µs) L-N/N-PE/L-PENIimp | 25 / - / - kA |
| Nominal discharge current (8/20 µs) L-N/N-PE/L-PENIn | 25 / - / 25 kA |
| Protection levelUp | ≤ 2,5 kV |
| Follow-on current extinguishing capability AC L-N (260 V AC) Ifi | 10 kAeff |
| Short-circuit withstand capability at max. back-up fuseISCCR | 50 kAeff |
| Max. acceptable backup fuse (branch wiring) | 250 A gG |
Additional Information
| Max. acceptable backup fuse (V-type through wiring) | 125 A gG |
| Operating temperature rangeTU | -40 - +80 °C |
| Min. conductor cross section at terminals | 10 mm² solid/flexible |
| Max. conductor cross section | 50 mm² stranded/35 mm² flexible |
| Recommended conductor cross section | 25 mm² |
| Max. connection torque for terminals | 4,0 Nm |
| Degree of protection (IEC EN 60529) | IP 20 |
| Power supply system | between L and N |
| Composed of: number of moduls | 1x 96 02 37 |
| Installation width | 39,8 mm |
| Max. operating voltage remote contact FM | 250 V AC/125 V DC |
| Max. operating current remote contact FM | 1 A AC/200 mA DC |
| Max. locking torque FM terminals | 0,25 Nm |
| Max. conductor cross section FM | 1,5 mm² |
| Inflammability class according to UL 94 | V0 |
| Mounting on | 35 mm DIN rail (EN 60715) |
Accessories
CT-T1-350-M
Article Nr.: 960237
CT-T1-350-M
Article Nr.: 960237
| IEC category | Type 1 / class I |